Mechanical InspectorKnight's Armament Company
Knight's Armament Company has been ranked as low-risk by Red Balloon research. Click here to learn more.
Job Summary
Job Title: Mechanical Inspector
Reports to: Quality Assurance Lab Supervisor
Special training needed: Geometric Dimensioning and Tolerancing, Drawing Interpretation
Experience Required:
Three years minimum experience in an NC machine manufacturing environment. Coordinate Measuring Machine (CMM) experience (PC-DMIS preferred) helpful but not required. Ability to learn is required.
Must be extremely proficient in the use of inspection tools (i.e. calipers, micrometers, Inter-mics, height gage, etc.).
Must possess a working knowledge of MS Office products.
Purpose of position:
To perform first piece, and in-process inspections on machined components in order to ensure compliance to Engineering drawings.
Interface with shop floor, production and Engineering personnel to ensure timely resolution of Non-conformances.
Ensure that all product manufactured at KAC meets all Engineering requirements.
Description of job duties:
• Perform First Piece inspections in order to verify part compliance to Engineering drawings prior to approving the part for
Production machining.
• Perform In-Process inspections on production parts in order to ensure continued compliance to Engineering drawings.
• Document the results of all inspections and compile weekly reports of inspections performed.
• Interface with machine operators and/or programmers in order to communicate and resolve issues (non-conformances) in
an effective and timely manner.
• Interface with Manufacturing Engineering personnel in order to resolve drawing, fixture or programming-related issues.
• Use a computer to input and print documents as non-conformance report.
• Performs reasonably related duties as assigned.
Production machining.
• Perform In-Process inspections on production parts in order to ensure continued compliance to Engineering drawings.
• Document the results of all inspections and compile weekly reports of inspections performed.
• Interface with machine operators and/or programmers in order to communicate and resolve issues (non-conformances) in
an effective and timely manner.
• Interface with Manufacturing Engineering personnel in order to resolve drawing, fixture or programming-related issues.
• Use a computer to input and print documents as non-conformance report.
• Performs reasonably related duties as assigned.
Physical demands:
Seeing-Required
Speaking-Required
Hearing-Required
Standing-Often
Walking-Frequently
Sitting-Occasionally
Lifting- Occasionally, up to 25 pounds
Carrying- Occasionally, up to 25 pounds
Pushing- Occasionally
Pulling- Rarely
Climbing- Rarely
Balancing-Rarely
Twisting- Occasionally
Reaching- Frequently
Grasping/Handling- Frequently, for dexterity, fine finger handing
Stooping/Crouching-Rarely
Kneeling-Rarely
Crawling-rarely
Environment Conditions:
Inside: 90%; Outside: 10%
Temperature Conditions: Controlled- in excess of 70-degree-occasionally
Communication skills/related responsibilities
English:
- Speaking-Fluent
- Read-Fluent
- Write-Fluent
