Senior LMR TechnicianAir Comm (SentraCam)
Job Summary
Experienced RF / LMR Technician
Service Department · Reports to the Regional Service Manager
POSITION TITLE | Experienced RF / LMR Technician | DEPARTMENT | Service |
REPORTS TO | Regional Service Manager | LOCATION | Phoenix, AZ (PHX) |
EMPLOYMENT TYPE | [e.g., Full-Time — to be confirmed] | COMPENSATION | TBD |
POSITION SUMMARY
Air Comm is a Motorola Solutions Platinum dealer that sells, designs, installs, and services MOTOTRBO land mobile radio (LMR) systems. Headquarters is in the Phoenix, Arizona area, with service shops in Phoenix (PHX), Dallas–Fort Worth (DFW), Houston (HOU), and Salt Lake City (SLC).
This requisition is for an experienced RF / LMR Technician in the Service department, reporting to the Regional Service Manager. The technician will handle the full range of work Air Comm already runs in Zoho FSM — including service calls, scheduled and preventive maintenance (Air Care PM), installations, mobile and vehicle installs, job walks, tower and site work, subscriber and infrastructure programming, equipment staging, and project work — and will document that work in Zoho FSM.
A minimum of 3 years of prior RF / LMR experience is required. Travel is a regular part of the job and is expected to be 50–75%.
KEY RESPONSIBILITIES
• Diagnose, troubleshoot, repair, and complete service calls on MOTOTRBO and related LMR systems at customer sites and in the shop (FSM work types include Service Call–Air Care and related technical service work).
• Perform scheduled and preventive maintenance, including Air Care contract PM; complete PM forms and document results (FSM types: Scheduled Maint–AirCare / Air Care PM).
• Perform system and site installations and RF alignment, including work that originates from sales orders converted as installation requests and broader project work (FSM types: Install / installation; Project).
• Complete mobile and vehicle installations of radios and related communications equipment, including work in buildings and, when required, heavy equipment (FSM type: Mobile Install).
• Conduct job walks and site surveys, complete Job walk forms, and report findings to sales and service (FSM type: Job Walk).
• Perform tower and radio-site work, including repeater and site installation and alignment, antenna and feedline work, sweep testing (Site Master or equivalent), PIM and VSWR measurements, and Motorola R56 grounding practices. Coordinate tower-crew support when it is required (FSM type: Tower Work).
• Program MOTOTRBO conventional, IP Site Connect, Capacity Plus / Linked Capacity Plus, Connect Plus, and Capacity Max systems and subscribers using Motorola CPS and CPS 2.0 (and Radio Management where applicable). Process programming tickets in FSM.
• Stage equipment and prepare radios, infrastructure, and accessories for field deployment (FSM staging requests and tickets).
• Perform bench repair and alignment using a communications service monitor (for example, an R8000 or R8100), spectrum analyzer, wattmeter, and related test equipment.
• Maintain practical awareness of FCC licensing requirements in day-to-day programming, installation, and site work.
• Document all work accurately in Zoho FSM, including work orders, service appointments, service reports, notes, and time / attendance; obtain customer signatures when required.
• Support customers in the industries Air Comm serves, including sites with mine-safety or customer-specific safety requirements (for example, MSHA or HSEP) when assigned, and follow all required site-access and safety procedures.
• Participate in after-hours and on-call coverage as scheduled to support mission-critical customer systems.
• Travel 50–75% of the time to customer sites, other Air Comm shops, and remote locations, including overnight travel as needed.
• Follow Air Comm safety, quality, and service procedures, and work closely with dispatch, sales, and other technicians.
REQUIRED QUALIFICATIONS
• Minimum of 3 years of prior RF / LMR (land mobile radio / two-way radio) experience. This is a firm minimum. Additional experience is welcome, but it does not replace the 3-year requirement.
• Demonstrated hands-on experience installing, programming, maintaining, and repairing two-way radio / RF systems.
• Working knowledge of RF theory, transmitters, receivers, antenna systems, and feedlines.
• Proficiency with RF test equipment, including a communications service monitor / test set, wattmeter, and multimeter. Experience with a Site Master or equivalent sweep, PIM, and VSWR testing is strongly expected at this experience level.
• Ability to interpret schematics, block diagrams, and system drawings.
• Valid driver’s license and a driving record that meets Air Comm standards.
• Ability to pass a background check, drug screening, and motor vehicle record review.
• High school diploma or equivalent. A technical certificate, associate degree in electronics or a related field, or military electronics / communications training is a plus, but it does not replace the 3-year experience minimum.
• Ability to work safely indoors and outdoors, climb ladders, work at heights when certified or assigned, and lift up to 50 pounds.
• Clear written and verbal communication, professional customer service, and accurate documentation habits.
• Legal authorization to work in the United States.
PREFERRED QUALIFICATIONS AND CERTIFICATIONS
• Motorola MOTOTRBO certifications, and direct experience with Conventional, IP Site Connect, Capacity Plus / Linked Capacity Plus, Connect Plus, and/or Capacity Max.
• Experience with Motorola CPS, CPS 2.0, and/or Radio Management.
• FCC General Radiotelephone Operator License (GROL) or an ETA equivalent, and/or CET certification.
• Tower climbing certification.
• OSHA 10 (OSHA 30 is also welcome).
• Motorola R56 installer training or equivalent grounding and site-installation experience.
• Experience with DAS / BDA systems, duplexers and combiners, battery backup systems, dispatch consoles, and basic IP networking (subnets, VLANs, gateways, and IP addressing).
• MSHA or other mine-site safety training, and experience at industrial, utility, or public-safety sites.
• Amateur / ham radio license.
PHYSICAL AND TRAVEL REQUIREMENTS
• Travel requirement: 50–75%. Travel is required 50–75% of the time. This includes travel within the assigned shop’s service area, trips to customer sites and radio sites, travel to other Air Comm shops (PHX, DFW, HOU, SLC) as needed, and overnight travel.
• Work is performed in the shop, at customer facilities, in vehicles, and at outdoor radio sites, in a range of weather conditions.
• Must be able to stand, stoop, kneel, and work in confined or elevated spaces; climb ladders; and lift and carry up to 50 pounds. Tower climbing, when required, is limited to technicians who hold the appropriate certification and authorization.
• Schedule is typically Monday–Friday, with after-hours, weekend, and on-call work as customer and project needs require.
TOOLS, VEHICLE, AND DRIVING RECORD
• A valid driver’s license and an acceptable motor vehicle record are required for the duration of employment. Driving a company or personal vehicle for work is part of this role.
• Company vehicle, tools, and specialty RF test equipment may be provided according to shop policy. Technicians are expected to care for company vehicles, tools, and test equipment in accordance with Air Comm policy.
• Technicians may be expected to provide a basic personal hand-tool set; specialty RF and site-test equipment is supplied by the company.
COMPENSATION
Compensation: TBD / per HR. Benefits are offered in accordance with current Air Comm policy and will be confirmed by Human Resources.
EQUAL EMPLOYMENT OPPORTUNITY
Air Comm is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by applicable law.








